This layer-additive process is used to build parts using a controlled high energy electron beam to melt a pool on the substrate whilst the wire feed system adds material to build up the required part
The electron beam provides the energy source used for melting metallic feedstock, which is typically wire (powder can also used). The electron beam is a highly efficient power source that can be both precisely focused and deflected using electromagnetic coils at rates well into thousands of hertz. A major advantage of using metallic components with electron beams is that the process is conducted within a high vacuum environment of 1×10-4 mBar or greater, providing a contamination-free work zone that does not require the use of additional inert gasses commonly used with laser and arc based processes. With Near Net Shape, feedstock material is fed into a molten pool created by the electron beam. Through the use of CNC, the molten pool is moved about on a substrate plate, adding material just where it is needed to produce the Near Net Shape. This process is repeated in a layer-by-layer fashion, until the desired 3D shape is produced.
- Parts are 100% dense and structurally sound without moulds or tooling
- Intricate, complex geometries can be made in a single operation whilst minimising scrap and manufacturing time
- Metal feed stock can be wire fed or powder
- Electron beam out performs lasers with higher integrity coupling and better deposition rates
- Reduces scrap material wastage
- Final machining time reduced